1. Vray Failed To Checkout V-ray Gui License

Hfss Failed To Checkout License. (IRIX, Linux) Type maya to repeat. 'Failed to check out license hfssdesktop Cannot connect to license server.

Python gives you keyword arguments, which helps keep the average length in characters of a hycohanz function call to a minimum, while minimizing implementation overhead compared to MATLAB. Q: Why not skip the HFSS interface entirely and directly emit a.hfss file? Then I could use this library on Linux.

So, we have defined an expression for a material property, viscosity in this case. How do we get CFX to use that expression? In the material property input, we click on the expression icon to the right of the particular material property we are defining, then enter the name of the expression, as shown here for expression visc2: Summing it up, we can use CFX Expression Language to define material property equations for non-constant material values. In the next installment we will look at how to use CEL to define changing boundary conditions, such as a ramped load.

However, this extension unleashes a significant capability within the Workbench Mechanical tool that wasn’t there previously, access to UPF’s. The documentation states that it works with both versions 14.5 and 15.0 of ANSYS. To get to the 15.0 ACT Extensions download area, login to the ANSYS Customer Portal and navigate through Downloads > Extension Library > 15.0.

Starting off with a smaller value of load and ramping it to the final value can aid in convergence in these circumstances. Note that the rate of load application can be manually changed during the solution in the solver manager, but why not take advantage of CEL and do it automatically?

There are (were) specialty slide rules for other purposes. Note that with additional knowledge and skill in visually interpolating on a log scale, up to 3 or even 4 significant digits can be determined depending on the size of the slide rule. The author, attempting to prove that 4 x 6 is indeed 24 After having studied the Marks’ section on slide rules, experimenting with a slide rule app on an iPad as well as the PADT behemoth on the wall, I conclude that it was a very elegant method for calculating numbers much more quickly than could be done by traditional pencil and paper. It’s must faster to add and subtract vs. Complicated multiplication and long division. My high school physics teacher actually spent a day or two teaching us how to use slide rules back in the early 1980’s. By then they had been made functionally obsolete by scientific calculators, so looking back it was perhaps more about nostalgia than the math needed.

• First, turn on the mesh via the “Show Mesh” button so that it’s visible for the path creation • From the Model branch in Mechanical, insert Construction Geometry • From the new Construction Geometry branch, insert a Path • Note that the Path must be totally contained by the finite element model, unlike in MAPDL. • If you know the starting and ending points of the path, enter them in the Start and End fields in the Details view for the Path. • Otherwise, click on the “Hit Point Coordinate” button: • Pick the node location for the start point, click apply • Pick the node location for the end point, click apply • In the Solution branch, insert Linearized Stress (Normal Stress in this case); set the details: • Scoping method=Path • Select the Path just created • Set the Orientation and Coordinate System values as needed • Define Time value for results if needed Results are displayed graphically along the path as well is in an X-Y plot and a table Besides normal stresses, membrane and bending, etc.

(As usual, svnsync can be used instead of dump/load.) The cycle can be done with any version of Subversion, and after the cycle the repository should be served exclusively by Subversion 1.7.5 or newer to prevent further instances of the bug from entering the repository. See for more information about these problems. Client prompting for SSL client certificates Subversion has long supported the use of SSL client certificates for authentication against a server which accepts such. Users typically employ the ssl-client-cert-file option in their 'servers' runtime configuration file to inform the client regarding the location of the relevant certificate file. In interactive scenarios, Subversion can also prompt the user for the location of the certificate file when that runtime-configured value isn't set or otherwise suitable. Prior to 1.8.0, this prompting was enabled by default.

Computer based horse race handicapping and wagering systems pdf. Using group rates can be a very effective way to get productive training into your organization, especially if travel is involved since only one instructor may need to travel vs. Several students. Web-based training is another option.

Exclusive SQLite locking of working copies In the root of every Subversion working copy there is an database in the.svn directory and Subversion clients use this database when accessing the working copy. By default Subversion uses shared SQLite locking and this allows simultaneous access to the working copy by multiple clients with exclusive locks only being held for short periods. The 1.8 command line client can be configured to use exclusive SQLite locking by setting the following in the.subversion/config file: [working-copy] exclusive-locking-clients = svn or by using the command line option --config-option config:working-copy:exclusive-locking-clients=svn.

A program written to any previous 1.x API can both compile and run using 1.8 libraries. However, a program written for 1.8 cannot necessarily compile or run against older libraries. There may be limited cases where the behavior of old APIs has been slightly modified from previous releases. These are cases where edge cases of the functionality has been deemed buggy, and therefore improved or removed. Please consult the for more detailed information on what these APIs are and what impact these changes may have. New Feature Compatibility Table New Feature Minimum Client 1 Minimum Server Minimum Repository Notes 1.8 any any 1.8 1.5 1.5 1.8 any any might be required for optimal performance with 1.8 clients which access the repository via HTTP. 1.8 any any A 1.8 server isn't required but will deliver superior performance when asked for inherited properties.

If the path was the SVNParentPath then SVN would try to access a repository with the name of the DirectoryIndex file that was found. • When using the%f variable in your log directives you would log the path constructed as described above. This was confusing since it was not the content that was actually served. Starting with Subversion 1.7.12 and 1.8.2 the requests being served by mod_dav_svn will not be mapped to the local file system and when logging with the%f variable you will see a '-' logged. Blocks will no longer apply to such requests. Subversion 1.7.14 and 1.8.5 changed this further and the filename for the request will now be set as dav_svn:/path/to/repo/path/in/repo (e.g.

One difference, though, is that while Mechanical APDL is dimensionless, CFX is not. Therefore, CEL definitions contain units where appropriate. CEL is typically used in CFX-Pre and CFD-Post. A handy editor is available to assist in the definition of the expressions. Most of the activity is enabled by right clicking. Virtually any quantity in CFX that requires a value input can make use of CEL, including boundary conditions and material properties.

• Install HFSS. • Don’t install any drivers, press next. A new window will appear press ok.After completing installation Copy license.lic into C: Program Files Ansoft admin • Copy Ansoftfix.COM C: Program Files Ansoft HFSS11. These 2 files are in crack folder. • You might just be seeing Ansoftfix.COM file as only “Ansoft”. So in order to edit its extension go to Organize>Folder and search options.

In two previous entries we introduced CFX Expression Language, CEL: In this third installment we will see how to use CEL to apply boundary conditions as equations rather than constant values. For example, if a non-constant velocity profile can be defined as an equation, we can use CEL to define as well as apply the profile. Let’s look at an example in which the velocity profile is a function of y coordinate: u(y) = 6 * U max * y / H * (1 – y/H) (m/s) Using the procedure we learned in part 1 of this series, in CFX Pre we have defined expressions for H and Umax. We then defined the equation for the velocity profile as Uprofile: Next we go to the Plot tab within the Expressions editor to verify that our velocity profile matches expectations: To use our new expression in CFX Pre, we just enter the expression name in the appropriate field when defining the inlet velocity: Finally, this velocity plot from CFD Post shows that indeed our desired velocity profile was applied at the inlet. Hopefully this demonstrates how easy it can be to use CFX Expressions to define non-constant boundary conditions. In the next part of the series, we will look at using expressions to ramp or step apply loads.

The second equation, visc2, is more flexible in that we have defined the constant terms as expressions themselves. It’s always a good idea to verify the input. Most expressions can be easily plotted by clicking on the Plot tab in the Details view. Here is a plot of the viscosity vs. Shear strain rates between 0 and 1, as calculated by expression visc2: Similarly, the Evaluate tab can be used to evaluate the expression for desired values of the inputs.

Automatic reintegration merge (--reintegrate option deprecated) During merges which merge all eligible revisions from another branch, Subversion 1.8 will automatically decide whether or not the merge is. Therefore, reintegrating a branch does no longer require the --reintegrate option for correct operation. The --reintegrate option of svn merge is now deprecated and its use is discouraged. To reintegrate a branch, have a clean working copy of trunk and run the following command in its top-level directory: $ svn merge ^/branches/my-branch This merge will still perform similar sanity checks which svn merge --reintegrate performed in earlier releases: • The working copy must not be a. • The working copy must not have. • There must be no gaps in revision ranges merged from the reintegration target (e.g. The trunk) to the reintegration source (i.e.

Start a new Workbench session. Click File > Import.

Directory and property storage reduction For each changed node in a FSFS repository, new versions of all parent directories will be created. Larger repositories tend to have relatively deep directory structures with at least one level (branches, modules or projects) having tens of entries. The total size of that data may well exceed the size of the actual change. Subversion 1.8 now supports directory deltification which eliminates most of that overhead.

Hopefully by now you’re starting to see the value of CEL. We are just scratching the surface here, but once you start using it you will find that CEL has a lot of potential powerful uses. In the next installment we’ll cover some additional capabilities available in CEL.

Notice the Add button at lower left is grayed out: What it’s waiting for us to do is type in the name of our desired remote computer, like this: Now that a new name has been typed in the Name field, the Add button is active. After clicking Add, we get this: After clicking OK, we will now see that the new remote computer has been added in the RSM window: The next step is to set your login password for accessing this computer. Right click on the new hostname in the RSM window in the tree at left, and select Set Password. Then enter your network login and password information in the resulting window: If your accounts are fully setup, at this point you can run a test by right clicking on the localhost item in the tree under the remote computer name and selecting Test Server: If the test is successful, you will see that the test job completed with a green checkmark on the folder icon in the upper right portion of the RSM window: If your login is not configured properly, you will likely get an error like this one shown below. Notice that the upper right portion now states that the job has failed and there is a red X rather than a green checkmark on the folder icon.

This link in to the ANSYS 14.5 Help system explains it: // User’s Guide:: 0 // 7. CFD-Post File Menu // 7.15. File Types Used and Produced by CFD-Post // 7.15.10. Limitations with FLUENT Files If you are a user of APDL, ANSYS Parametric Design Language, what I have written above about CEL should look familiar.

This was discussed by Eric Miller of PADT in a prior blog entry,. Further, PADT’s customer feedback has consistently shown that our training classes pay for themselves. In other words, increases in productivity due to a quick jump up the learning curve can very quickly return the fees paid for training. There are other factors to consider in training as well. What is the experience base of the organization providing the training? Do they have real-world experience in using the simulation tools for which they are providing training? What about location, flexibility, and scheduling?

In previous releases of Subversion (1.6 and earlier), Subversion would automatically upgrade the working copy to the new format when a write operation was performed. Subversion 1.8, however, requires an upgrade for both read and write operations on the working copy, and makes the upgrade a manual step. Before using Subversion 1.8 with existing working copies, users will be required to run the svn upgrade command to upgrade working copy metadata to the new format. This command may take a while, and for some users, it may be more practical to simply checkout a new working copy.

Therefore, Subversion 1.8 introduces a very lightweight client that skips most of that local processing. Svn-bench provides commands similar to the standard command line interface, adding a null- prefix to them. Currently implemented are null-export, null-list and null-log. They support most of the parameters of their standard command counterparts.

Both properties work just like their analogs in the runtime configuration with two exceptions: • The new properties only effect the subtrees rooted at the path on which the property is set. Thus a given path may be affected by multiple svn:auto-props or svn:global-ignores properties set on different parents of that path. • The svn:auto-props property is not tied to the enable-auto-props runtime configuration option. So even if you have enable-auto-props=no set in your configuration or via the --config-option option, svn:auto-props are still applicable. Note however, that exactly like the runtime configuration and svn:ignore property, both the svn:auto-props and svn:global-ignores properties can be disregarded with the --no-ignore and --no-auto-props options respectively.

See the validate-files.py hook script and its related configuration files in Subversion's tools/hook-scripts for examples of how to validate a versioned authz file's syntax and specific permissions. Svn-bench benchmarking client Identifying bottlenecks in your Subversion infrastructure may be difficult because client-side influences (virus scanners, slow disks etc.) tend to mask other limitations.

For best results, it is recommended to always merge all eligible revisions, i.e. Not using the -r or -c options of svn merge. Merging just a subset of eligible revisions increases the likelihood of problems during future merges. Using --reintegrate in Subversion 1.8 will force a reintegration merge, whether or not that's the right merge to perform in the given situation. Inherited Properties Property inheritance provides a mechanism to find the versioned properties set on the parents of a given working copy or URL path.

We’ll see how to do this below. For more information on “picking your nodes”, see the Focus blog entry written by Jeff Strain last year: The top level process for postprocessing result along a path is: • Define a Path as construction geometry • Insert a Linearized Stress result • Calculate the desired results along the path using the Linearized Stress item The key here is to define the path using existing nodes. Sometimes it’s easier to figure out where the path should start and stop using nodal locations rather than figure out the coordinates some other way. So, let’s see how we might do that.

$ time svn-bench null-export svn://localhost/tsvn_repos/trunk 179 directories 3,661 files 84,902,674 bytes in files 20,560 properties 315,031 bytes in properties real 0m0.185s user 0m0.128s sys 0m0.040s By running the client close to or directly on the server machine, you will be able to determine the raw server speed and compare that to what the client-side is seeing. Fsfs-stats repository statistics This server-side tool will read a whole format 4 (Subversion 1.6) or newer repository and print out various statistics on the contents of the rev and pack files in it. It starts of with very general information and then breaks it down into various sub-demographics. The statistics include: • Total repository size bytes • Number of revisions and changes • Sum of original and deltified file sizes • Sum of original and deltified directory sizes • Structural overhead due to node revisions, change lists etc.

Vray Failed To Checkout V-ray Gui License

Because Apache HTTPD modules always run in the 'C' locale, which is restricted to ASCII, mod_dav_svn usually failed trying to process non-ASCII characters. Among other problems, this prevented pre-lock and post-unlock hook scripts from operating on paths containing non-ASCII characters, and prevented non-ASCII error output from start-commit and pre-commit hooks from reaching SVN clients. Subversion 1.8 addresses these problems with a new SVNUseUTF8 option for mod_dav_svn. If this option is set, mod_dav_svn assumes that all hook script input/output is encoded in UTF-8. This is always the case for paths passed to hook scripts, since Subversion uses UTF-8 internally for all paths.