• Mt6572 Scatter File Download

A, B and C are cases in which most likely you previously downloaded a bad or corrupt “PRELOADER” firmware component to your MT65xx device via SP Flash Tool.To get the right idea you might want to read below. SP Flash Tool; Scatter Files. Download MediaTek SP Flash Tool v5. Flash tools MT6570 flash tools MT6571 flash tools MT6572 flash tools MT6573 flash tools. Smart Phone Flash Tool (SP Flash Tool) Features. Flash Stock Rom. It allows you to flash scatter based firmware on android device (MTK based). It also allows you to downgrade or upgrade your device firmware in few clicks.

Size(1.1 KiB) (Downloads: 2113 ) • Version. Size(1.1 KiB) (Downloads: 1940 ) • Version. Size(367.0 B) (Downloads: 1540 ) • Version. Size(367.0 B) (Downloads: 1448 ) • Version. Size(357.0 B) (Downloads: 1464 ) • Version. Size(385.0 B) (Downloads: 1446 ) • Version. Size(1.1 KiB) (Downloads: 1540 ) • Version.

Size(1.2 KiB) (Downloads: 988 ) • Version. Size(1.1 KiB) (Downloads: 1153 ) • Version.

Size(353.0 B) (Downloads: 1575 ) • Version. Size(1.1 KiB) (Downloads: 1854 ) • Version. Size(368.0 B) (Downloads: 1920 ) • Version. Size(368.0 B) (Downloads: 1732 ) • Version. Size(1.1 KiB) (Downloads: 1782 ) • Version. Size(1.1 KiB) (Downloads: 1099 ) • Version.

Better have a complete (yes, complete meaning not only imei, but all of your nvram) backup before trying. @Gizbeat What I'm missing between step 1 and 2 in the OP, is checking with adb if the phone is recognized and if not adding the id to the ini file. That ensures the communication and drivers are ok to be used for flash and droidtools. Since mirandam is offering an explanation of what to flash and what not to flash etc, maybe my remarks are On topic? In reference to Preloader: Quote:It is also the first stage of the complete loading process of your phone.

Mt6572 Scatter File Download

The SP Flash Tool can also handle this low-layer interface. However, the SP Flash Tool can only use this low-layer download interface to replace the “ PRELOADER” component of the firmware. Afterwards, with the correct “ PRELOADER” firmware component, the MT65xx device will instantly reinitialize its related Integrated Circuits, switching to the normal “ MediaTek PreLoader” download interface that will take in the rest of the firmware components sent by SP Flash Tool.

The process will start and a red progress bar will appear. • After the red progress bar is complete, there will appear a purple progress bar. • Right after the purple progress bar is complete, a message will appear underneath it: “ Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up). • When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated. • You can now safely disconnect your phone and turn it on. The process ends here. Flashing only part of the ROM • In case you want to flash just one part of the ROM, that is also possible.

What if our MT65xx device has got the wrong preloader? Here we go For the record, I will consider the MT65xx device as being recoverable through this procedure in that case in which there still is an interaction with the Device Manager on the Windows PC when you connect the MT65xx device without the battery pack if possible, via USB and the blue light turns ON (if the notification LED exists). This procedure apples to your MT65xx device if: A. The MT65xx device is not starting at all. The MT65xx device is starting/restarting (vibrates) but the screen remains black. The SP Flash Tool reports an error that prevents the successful download of the firmware files to your MT65xx device because your “ PRELOADER” firmware component that you are trying to download is bad or corrupt.

Size(383.0 B) (Downloads: 2436 ) • Version. Size(386.0 B) (Downloads: 2230 ) • Version. Size(381.0 B) (Downloads: 2017 ) • Version. Size(1.1 KiB) (Downloads: 1920 ) • Version. Size(1.1 KiB) (Downloads: 2308 ) • Version. Size(1.1 KiB) (Downloads: 2328 ) • Version. Size(1.1 KiB) (Downloads: 2061 ) • Version.

[Only registered and activated users can see links ] ahh slide 5,,,lacks preloader stuff [Only registered and activated users can see links ] cheers. Thank you for your reply.

Simply load the Scatter file and connect your smartphone to the computer and press on Format button. Flash Recovery: Beside Flashing the complete Stock Rom or any Custom Rom, it also enable you to flash the recovery file. For Flashing recovery, you also need to load the Scatter file.

• open sp flash tool (Flash_tool.exe) which you downloaded from here. • click on download tab if you are using sp flash tool v5.1436.00, otherwise skip this step. • now click on scatter-loading button. • give the path of your smartphone flash file (you can find thet scatter file in the flash rom folder). • then click on the download button or press f9 button to start the flashing process. • now connect your mobile to computer via usb cable without battery. • insert battery in your phone.

In the window “ MTK USB Port” was now shown as being installed, which is the correct low-layer download interface driver that I wanted to have. On 64 bit operating systems you might need to confirm the unsigned driver installation and you might also do some settings in order to to allow your 64 bit operating system to use unsigned drivers like the ones provided on this page. My experience with these drivers on Microsoft Windows 7 64 bit was OK. The point is that, when you connect the device with no battery inside or turned off and the blue light comes on, in the Device Manager Window you must have one of this two devices showing up under “ Ports (COM & LPT)“: 1.

POINTS TO REMEMBER WHILE FLASHING. How To Flash Android Mtk flashing is the process of reinstalling the operating system of the cell phone. Charge your phone’s battery upto minimum 60%-80%. This action will erase all your personal data (files, Apps, Images etc). Also remove the Micro SD card and sim card. We are trying to give our best but use this at your own risk, we dont responsible if there will be something get wrong with you. Download How to Flash MT6572 Flash • Download and extract flash file in your computer • install usb drivers of mtk smartphone in your computer if you already installed the drivers so skip this step.

What's needed: • USB data cable • MediaTek USB VCOM drivers • SP Flash Tool ( Latest version SP_Flash_Tool_v3.1224.01) • First of all, make sure that you have MediaTek DA USB VCOM drivers installed. Flashing the whole ROM • First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file ( MT6575_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt, depending on which phone you have) for your device and ignore any message that may appear. • Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).

• MediaTek USB VCOM driver downloads [get it through above official site] • Scatter file and flashing files • CWM recovery.img • A Windows/Linux PC • USB cable of mobile device MediaTek USB VCOM Drivers Manual Installation. Download and installation properly connect your MediaTek device to PC properly. Basic Tutorial – SmartPhone Flash for MediaTek devices • Download SP Flash.zip and install it.

Remove the back cover of the device and take out the battery pack from the device. During the interventions that I’ll describe on this page, every time you connect your MT65xx device to your PC you will need to make sure that it is turned off, or, if it’s possible, it has the battery pack taken out. The procedures described below will work by putting your MT65xx device in Download Mode, a state in which the Flash Memory can be formatted and reprogrammed. The flash memory holds all the binary information required for the MT65xx device to boot up and function. (The flash memory also contains the internal memory of the device, holding up drivers, applications and other types of data in memory structures like ROM ( Read Only Memory) & NVRAM ( Non- Volatile Random Access Memory).

We are trying to give our best but use this at your own risk, we dont responsible if there will be something get wrong with you. Download How to Flash MT6577 Flash Tutorial • Download and extract flash file in your computer • install usb drivers of mtk smartphone in your computer if you already installed the drivers so skip this step. • open sp flash tool (Flash_tool.exe) which you downloaded from here. • click on download tab if you are using sp flash tool v5.1436.00, otherwise skip this step. • now click on scatter-loading button.

Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please -! If you have any problems with the registration process or your account login, please contact. > > > Mtk Android (Sp flash tool ) tutorial:) User Name Remember Me?

Size(319.0 B) (Downloads: 2355 ) • Version. Size(319.0 B) (Downloads: 1976 ) • Version. Synology surveillance station setup. Size(1.1 KiB) (Downloads: 1850 ) • Version. Size(1.1 KiB) (Downloads: 1950 ) • Version. Size(379.0 B) (Downloads: 2040 ) • Version.

Step 5: Once SP Flash tool is launched, click on “ Download” tab. Step 6: Now, click on “ scatter-loading” button in the download tab. Step 7: Next, click on “ Open Scatter File” and select the scatter file from Step 1. For reference see the image given below.

Once it is over, you will see the “ Download OK” green ring in SP Flash Tool. Step 11: Now, close SP Flash tool on your computer and unplug your smartphone.

Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone. Very important warning:Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone. After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it. Thanks for ur link brother it awesome please if u have qmobile noil a8 full backup please share here mt6577 android 4.0.4 sw ver:alps.ics2.6577.sp.v1 thanks advance.

SP Flash Tool Error: BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) A, B and C are cases in which most likely you previously downloaded a bad or corrupt “ PRELOADER” firmware component to your MT65xx device via SP Flash Tool. To get the right idea you might want to read below: There is the situation in which if you download a new firmware to your MT65xx device that has either a bad, incompatible or corrupt “ PRELOADER” component. The SP Flash Tool will report the download as being successful but your MT65xx device will not start afterwards and neither will the SP Flash Tool be able to download the firmware components again because the normal “ MediaTek PreLoader” communication interface will not start unless the SP Flash Tool will first send a good “ PRELOADER” firmware component. The “ PRELOADER” firmware component has the required attributes to allow the MT65xx device to communicate with the PC trough the normal “ MediaTek PreLoader” download interface, trough which the SP Flash Tool is capable to send the rest of the firmware components to the Flash Memory of the MT65xx device. If this “ PRELOADER” firmware component was previously downloaded to the Flash Memory of the MT65xx device but it was incorrect or corrupt, the MT65xx device will use a special, low-layer interface, to communicate with the PC. This interface is non-removable and is the only interface that allow us to change the “ PRELOADER” firmware component if intended.

5.x fixed a critical bug about SP Flash Tool 3.x where the SP Flashtool reads incorrectly the scatter file of some new mobile based on MTK6582 (error: recovery partition is not flashable). - Windows version Latest version - 5.1728 () - Linux 64bit Latest version: 5.1728 () - 'PMT Changed' error If you get an error like 'PMT Changed' (it means that partition scheme of current ROM and new ROM are different) and are you sure that the ROM is specific for your device you can use a special version of Flashtool 3.xx that bypass this error. - Direct Memory Write To bypass a 'PMT changed' error (it means that the partition scheme described in the scatter of the new ROM is different than the ROM installed) there are two ways - If you have to flash the whole flash you can select in Flashtool the FIRWARE UPGRADE mode. - If you have to flash single module/partition you can use Direct Memory Write. Read carefully before to continue!!! - Please follow the instructions carefully - The author of thread and xda forum will not take any responsibility on whatever may happen with your device. - Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.

Flash ROM with SP Flash Tool On MT6595, MT6592, MT6589, MT6572, MT6582, MT6577 If you'd like to know how to flash a ROM on MT6595, MT6592, MT6589, MT6572, MT6582, MT6577, you're on the right post. Normally we refer people to a rooting post, which includes this information, as the procedure is mostly the same. But for the sake of simplicity, we'll write a stand-alone tutorial. Note, if you don't have access to a backup, create one first - Remember, we ARE NOT responsible for any hell that happens to your phone. You take any and all responsibility for messing with your phone. What you'll need: • MTK / MediaTek based smartphone • USB Data Cable • • • (if scatter not included with ROM) What to do: • Step 1 - Install the PDANet USB ADB VCOM drivers - • Step 2 - Download, extract, and run the latest version of SP Flash Tools • Step 3 - Check to see if a scatter file exists.